Revision history [back]
Why Did The Frame Ethernet Interface \Device\NPF {xxxetc.}Change?
On July 19, 2022 I was away from my Laptop. On July 22, 2022 I reset the network and since then I noticed that the Wireshark Interface_ID had changed.
I used Wireshark last on July 17, 2022-This is the normal Interface_id number.
Frame 1: 60 bytes on wire, 60 bytes captured on interface \Device\NPF_{xxxxx-6911-xxxx-xxxx-xxxxxxxx-xx}, id 0
On July 22, 2022 I use Wireshark and The interface_id number changed. What would of caused this to change? This is what it is now.
Frame 1: 554 bytes on wire, 554 bytes captured on Interface \Device\NPF_{xxxxxxxx-C1FF-xxxx-xxxx-xxxxxxxxxxxx}, id 0
In Preferences>Capture the first one is shown. Yesterday, I could see both of them, but that changed all of a sudden. Then, I could only see the older Interface \Device\NPF number. I also checked the Options on interfaces and the old interface number is not there either. I would have to re-type it to add it in. First I would like to know how this happened?
Thank you so very much...
Why Did The Frame Ethernet Interface \Device\NPF {xxxetc.}Change?
On July 19, 2022 I was away from my Laptop. On July 22, 2022 I reset the network and since then I noticed that the Wireshark Interface_ID had changed.
I used Wireshark last on July 17, 2022-This is the normal Interface_id number.
number.
Frame 1: 60 bytes on wire, 60 bytes captured on interface \Device\NPF_{xxxxx-6911-xxxx-xxxx-xxxxxxxx-xx}, id 0
0 On July 22, 2022 I use Wireshark and The interface_id number changed. What would of caused this to change?
This is what it is now.
now.
Frame 1: 554 bytes on wire, 554 bytes captured on Interface \Device\NPF_{xxxxxxxx-C1FF-xxxx-xxxx-xxxxxxxxxxxx}, id 0
0 In Preferences>Capture the first one is shown. Yesterday, I could see both of them, but that changed all of a sudden. Then, I could only see the older Interface \Device\NPF number. I also checked the Options on interfaces and the old interface number is not there either. I would have to re-type it to add it in. First I would like to know how this happened?
Thank you so very much...
Why Did The Frame Ethernet Interface \Device\NPF {xxxetc.}Change?
On July 19, 2022 I was away from my Laptop. On July 22, 2022 I reset the network and since then I noticed that the Wireshark Interface_ID had changed.
I used Wireshark last on July 17, 2022-This is the normal Interface_id number. Frame 1: 60 bytes on wire, 60 bytes captured on interface \Device\NPF_{xxxxx-6911-xxxx-xxxx-xxxxxxxx-xx}, id 0
On July 22, 2022 I use Wireshark and The interface_id number changed. What would of caused this to change? This is what it is now. Frame 1: 554 bytes on wire, 554 bytes captured on Interface \Device\NPF_{xxxxxxxx-C1FF-xxxx-xxxx-xxxxxxxxxxxx}, id 0
In Preferences>Capture the first one is shown. Yesterday, I could see both of them, but that changed all of a sudden. Then, I could only see the older Interface \Device\NPF number. I also checked the Options on interfaces and the old interface number is not there either. I would have to re-type it to add it in. First I would like to know how this happened?
Thank you so very much...
Why Did The Frame Ethernet Interface \Device\NPF {xxxetc.}Change?
On July 19, 2022 I was away from my Laptop. On July 22, 2022 I reset the network and since then I noticed that the Wireshark Interface_ID had changed.
I used Wireshark last on July 17, 2022-This is the normal Interface_id number. Frame 1: 60 bytes on wire, 60 bytes captured on interface \Device\NPF_{xxxxx-6911-xxxx-xxxx-xxxxxxxx-xx}, id 0
On July 22, 2022 I use Wireshark and The interface_id number changed. What would of caused this to change? This is what it is now. Frame 1: 554 bytes on wire, 554 bytes captured on Interface \Device\NPF_{xxxxxxxx-C1FF-xxxx-xxxx-xxxxxxxxxxxx}, id 0
In Preferences>Capture the first one is shown. Yesterday, I could see both of them, but that changed all of a sudden. Then, I could only see the older Interface \Device\NPF number. I also checked the Options on interfaces and the old interface number is not there either. I would have to re-type it to add it in. First I would like to know how this happened? number.
Thank you so very much...
Why Did The Frame Ethernet Interface \Device\NPF {xxxetc.}Change?
On July 19, 2022 I was away from my Laptop. On July 22, 2022 I reset the network and since then I noticed that the Wireshark Interface_ID had changed.
I used Wireshark last on July 17, 2022-This is the normal Interface_id number. Frame 1: 60 bytes on wire, 60 bytes captured on interface \Device\NPF_{xxxxx-6911-xxxx-xxxx-xxxxxxxx-xx}, id 0
On July 22, 2022 I use Wireshark and The interface_id number changed. What would of caused this to change? This is what it is now. Frame 1: 554 bytes on wire, 554 bytes captured on Interface \Device\NPF_{xxxxxxxx-C1FF-xxxx-xxxx-xxxxxxxxxxxx}, id 0
In Preferences>Capture the first one is shown. Yesterday, I could see both of them, but that changed all of a sudden. Then, I could only see the older Interface \Device\NPF number.
Thank you so very much...
Why Did The Frame Ethernet Interface \Device\NPF {xxxetc.}Change?
On July 19, 2022 I was away from my Laptop. On July 22, 2022 I reset the network and since then I noticed that the Wireshark Interface_ID had changed.
I used Wireshark last on July 17, 2022-This is the normal Interface_id number. Frame 1: 60 bytes on wire, 60 bytes captured on interface \Device\NPF_{xxxxx-6911-xxxx-xxxx-xxxxxxxx-xx}, id 0
On July 22, 2022 I use Wireshark and The interface_id number changed. What would of caused this to change?
This is what it is now.
Frame 1: 554 bytes on wire, 554 bytes captured on Interface \Device\NPF_{xxxxxxxx-C1FF-xxxx-xxxx-xxxxxxxxxxxx}, id 0
In Preferences>Capture the first one is shown. Yesterday, I could see both of them, but that changed all of a sudden. Then, I could only see the older Interface \Device\NPF number.
Thank you so very much...
Why Did The Frame Ethernet Interface \Device\NPF {xxxetc.}Change?
On July 19, 2022 I was away from my Laptop. On July 22, 2022 I reset the network and since then I noticed that the Wireshark Interface_ID had changed. Interface in the Frame
I used Wireshark last on July 17, 2022-This is the normal Interface_id number. Frame 1: 60 bytes on wire, 60 bytes captured on interface \Device\NPF_{xxxxx-6911-xxxx-xxxx-xxxxxxxx-xx}, id 0
On July 22, 2022 I use Wireshark and The interface_id number changed. What would of caused this to change? Frame 1: 554 bytes on wire, 554 bytes captured on Interface \Device\NPF_{xxxxxxxx-C1FF-xxxx-xxxx-xxxxxxxxxxxx}, id 0
In Preferences>Capture the first one is shown. Yesterday, I could see both of them, but that changed all of a sudden. Then, I could only see the older Interface \Device\NPF number.
Thank you so very much...