Revision history [back]
I built 2.6.4 (trying to recreate some issue) on a pi:
Hardware : BCM2835 Revision : a22082 Serial : 00000000c73d07a3 Model : Raspberry Pi 3 Model B Rev 1.2
- 3.4. Obtaining The Wireshark Sources - the easiest way is to download the tarball (step 3.4.3)
- Extract then head to the
tools
directory and look fortools/debian-setup.sh
(see 2.1. UNIX: Installation and Build Instructions) It will try to pull in the dependencies needed for the build. - 2.1.2. Building - first time I tried
ninja
which overloaded the pi. Redid the build withmake
and it completed. Don't use ninja on the pi
People have asked about just building tshark
but so much of the Wireshark
build is libraries and dissectors shared by tshark
and wireshark
that there isn't much saved by not building the gui part.
pi@raspberrypi:~/wireshark_build/wireshark-make/run $ ./tshark -v TShark (Wireshark) 2.6.4 (v2.6.4) Copyright 1998-2018 Gerald Combs and contributors. License GPLv2+: GNU GPL version 2 or later This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Compiled (32-bit) with libpcap, with POSIX capabilities (Linux), with libnl 3, with GLib 2.58.3, with zlib 1.2.11, with SMI 0.4.8, with c-ares 1.14.0, with Lua 5.2.4, with GnuTLS 3.6.7, with Gcrypt 1.8.4, with MIT Kerberos, with MaxMind DB resolver, with nghttp2 1.36.0, with LZ4, with Snappy, with libxml2 2.9.4. Running on Linux 4.19.118-v7+, with 926 MB of physical memory, with locale en_US.UTF-8, with libpcap version 1.8.1, with GnuTLS 3.6.7, with Gcrypt 1.8.4, with zlib 1.2.11, binary plugins supported (13 loaded). Built using gcc 8.3.0. pi@raspberrypi:~/wireshark_build/wireshark-make/run $
I built 2.6.4 (trying to recreate some issue) on a pi:
Hardware : BCM2835 Revision : a22082 Serial : 00000000c73d07a3 Model : Raspberry Pi 3 Model B Rev 1.2
- 3.4. Obtaining The Wireshark Sources - the easiest way is to download the tarball (step 3.4.3)
- Extract then head to the
tools
directory and look fortools/debian-setup.sh
(see 2.1. UNIX: Installation and Build Instructions) It will try to pull in the dependencies needed for the build. - 2.1.2. Building - first time I tried
ninja
which overloaded the pi. Redid the build withmake
and it completed. Don't use ninja on the pi
People have asked about just building tshark
but so much of the Wireshark
build is libraries and dissectors shared by tshark
and wireshark
that there isn't much saved by not building the gui part.
pi@raspberrypi:~/wireshark_build/wireshark-make/run $ ./tshark -v TShark (Wireshark) 2.6.4 (v2.6.4) Copyright 1998-2018 Gerald Combs and contributors. License GPLv2+: GNU GPL version 2 or later This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Compiled (32-bit) with libpcap, with POSIX capabilities (Linux), with libnl 3, with GLib 2.58.3, with zlib 1.2.11, with SMI 0.4.8, with c-ares 1.14.0, with Lua 5.2.4, with GnuTLS 3.6.7, with Gcrypt 1.8.4, with MIT Kerberos, with MaxMind DB resolver, with nghttp2 1.36.0, with LZ4, with Snappy, with libxml2 2.9.4. Running on Linux 4.19.118-v7+, with 926 MB of physical memory, with locale en_US.UTF-8, with libpcap version 1.8.1, with GnuTLS 3.6.7, with Gcrypt 1.8.4, with zlib 1.2.11, binary plugins supported (13 loaded). Built using gcc 8.3.0. pi@raspberrypi:~/wireshark_build/wireshark-make/run $